From this page you can test your camera and launch it online, to make sure it works correctly.

  * If this is your first time here, the browser will ask you if you want this site to use your camera.

  * This question will be near the address bar at the top of the screen.

  * Select Allow.

  * After you press the Allow button or allow it, your picture will appear in the next frame, and that means your camera is working properly.


Your privacy is reserved here

  All tests are done by the visitor "client" and this means your image or any other information can not be stored.

Webcam Test

Webcam Test / Troubleshooting Step 1: Install Webcam Driver

This step needs to be followed if your webcam is listed in Device Manager and you can see a yellow exclamation mark next to it. (See image below)

Note: The yellow exclamation mark usually signifies that there are no compatible drivers installed for the device.

The reason why your webcam is not working in the above scenario is that there are either no drivers (or incompatible drivers) installed.

Drivers are small software programs that enable the OS to recognize and control the devices attached to your system. You can either use a tool like DriverFinder to easily scan and download your missing webcam device drivers or else you will need to go to your webcam manufacturer’s support site and check if they have provided drivers to make the model of your webcam compatible with Windows.

If your webcam manufacturer provides the drivers for Windows, you will need to find, download and install them.

Next, you should restart you computer, after which your webcam should be automatically detected and installed under Windows 7 device manager. If your webcam manufacturer does not provide drivers for Windows 7, proceed to troubleshooting step 3.

Tip: To open Device Manager in Windows, click Start, type Device Manager in the Start Search box and press Enter.

Troubleshooting Step 2: Use Troubleshooting Wizard to Identify the Problem and Fix it

If your webcam is listed in Device Manager but does not work even after updating the drivers, you can use the Hardware and Device Troubleshooter provided in Windows 7. Follow the steps given below to start Hardware and Device Troubleshooter in Windows

  1. Click on the Start button
  2. Click on ControlPanel
  3. Under the System and Security category, click Find and fix problems
  4. Next, under Hardware and Sound, click Configure a Device
  5. Your system may prompt you to enter the Administrator password
  6. Enter the Administrator password
  7. Follow the instructions given in the troubleshooting wizard to identify and fix the issue

Troubleshooting Step 3: Install Windows 7 Driver in Compatibility Mode

If your webcam manufacturer does not provide drivers for Windows 10 for your make and model of webcam, you can try installing the Windows 7 Driver in compatibility mode. You will get an error which says that the program is not compatible with your version of Windows when you click on the setup file. In such a situation, you need to follow the steps below to install the webcam in compatibility mode:

  1. Right click on setup file for the webcam
  2. Scroll down to Properties and click it
  3. Click on Compatibility mode
  4. Check the box for “Run this program in compatibility mode for…”
  5. Select Window 7 from the dropdown menu
  6. Under the Privileges level , check “Run as an Administrator”
  7. Click on Apply
  8. Click OK
  9. Double click on the webcam setup file to start the installation procedure.

In a majority of the cases, the webcam will work after either updating the drivers or installing in compatibility mode.


We rely on you coming to our site to keep us running. If you like this site support us by coming back to it and sharing it with your friends.